Painting your Hive

October 24, 2008

Hello Hive! It's been a long time. I hope everyone is doing well. I've been a busy bee renovating our hive, being a worker bee and buzzing about the garden this summer. Like many of you who are moving into new hives yourselves, I thought I would revisit a question that I get often. One of the most exciting things about moving in together or getting a new place is making it your own. One of the most inexpensive ways to do that is by painting.

Materials:
Painter's Tape ($5), 3 roller covers ($10), roller extension pole ($12), primer ($16+), ceiling paint ($18+), synthetic bristle paint brushes ($5+) , plastic drop cloth ($1.79), paint can key (.89c), Paint ($25-55/gallon), paint can lids with spout ($3), wooden stirrers (free at the store), ladder, shop vac ($40), misc dry rags, paper towels, trays or cardboard to lay tools on.
"I LOVE YOU" on the wall - PRICELESS


For those of you who have moved into new construction, it’s always a little easier to work with. If you’re like us who are just starting out (poor), bought a lovely (old) home with lots of character (things to patch up), then it may need a little finessing. Here are some things that I’ve learned along the way.
  1. Preparation – Vacuum any dust and loose dirt particles. Unscrew wall outlet and switch plates. With a damp rag, wipe dust and grim off window ledges, trim and above windows. In very old homes, Mrs. Onion found that she had to wash her walls to clean the dirt and grease that accumulated over the years.
  2. Fill in any holes or cracks with spackle or joint compound. For a small job, there is a lighter weight spackle that comes in a tube or small container. Using a spackle knife, apply a glob into the hole and scrape across the hole while applying some pressure. The idea is you want to fill the hole and then scrape off the excess. For a demonstration, watch this video.
  3. Allow to dry over night. Then using a sanding block or sandpaper, lightly sand the area so it’s flush to the wall. Don’t use an electric sander or sand too aggressively. Vacuum with a shop vac or wipe up the dust from sanding the spackle. Lay a drop cloth down.
  4. Paint the spackled spot with primer. Most people say you’re “Priming your wall.” This is an important step that cannot be skipped because spackle will absorb paint differently and will swell leaving you a bump on the wall which is the opposite of what you wanted.
  5. Prime your walls – Most of the time, you have to do this especially if the previous wall color was an oil based paint or a very dark color. This clears the canvas for you and lets your new paint adhere to the wall and show off it’s true colors.
  6. Paint your ceiling - If you plan on painting the ceiling, you should do so before painting the walls. Give it 2 even coats. Allow it to fully dry before deciding whether it needs a 3rd coat. Some ceilings and some ceiling paints will absorb or adhere differently.
  7. Tape - Using 2" painter's tape, tape around the ceiling, moldings, and anything else you're avoiding. If you have a steady hand, you can "edge" freehand, but it's can't hurt to tape. Especially around the ceiling because your eye immediately draws to the ceiling. Clean lines are greatly appreciated here.
  8. Edge - With a 2 1/2" angled brush, paint (called "edging") along all the corners, around windows, doors, molding, floors and around below the ceiling. Edge at least 3" in because this is the area that your roller won't reach.
  9. Then the easy part! Paint! Thoroughly stir your paint first. Pour some paint into a paint tray lined with a disposal liner. Roll your roller into it a few times coating it evenly. Then roll the paint onto the walls. Depending on the color and conditions of your existing wall, you may need a second coat. Make sure you have plenty of light while you paint.
  10. Clean up - Dispose of paint cans properly. Call your local sanitation dept and ask them to pick them up. They should not go out in regular trash! Wash paint brushes in warm water immediately! Allow to dry flat. Roller covers can be reused if you take the time to wash them. Cover unused paint cans and hammer it down.
  11. Order a pizza and enjoy your new walls!
Before and After: Paint color is "Rain Washed" by Behr - Home Depot


Tips and FAQ -
  • My favorite references are This Old House because they show you images of all the tools you need. They are also very thorough. For a simplified version, ehow is a nice guide. HGTV is okay. They're a little more difficult to search through and their projects are often too big for us or don't apply.
  • When I start a new project that I've never done before, I ask all my friends, family and coworkers what they think. Often times, they will tell you something that you wouldn't know until you tried it and can save you a great deal of time and effort. Also, I read several online tutorials and COMPARE what they've said. Then I come to my own conclusion and way I plan on proceeding.
  • Give yourself enough preparation time especially to spackle. If you don't get it all done, don't fret or get frustrated. Don't feel pressured. The prep can be a pain in the stinger, so give yourself ample time. Mr. Snow Pea and I will alternate in processes. ie. I'll vacuum and tape. He'll paint the ceiling. I'll paint the walls. He'll order the pizza and I'll...you get the idea.
  • Pay for the "higher end" rollers and brushes. If you can afford to, pay for the higher end paints. They go on so much smoother and have more complex colors.
  • Avoid bumping the ceiling with colored paint which is why you do Step 8. Wipe immediately with a dry rag. Touch it up with a small brush. Ceiling paint is a different consistency, so often you can see the touch up marks. Don't wait.
  • To easily dispose of a roller cover, put a plastic bag around it and then pull. Discard the whole thing.
  • Saran or plastic wrap is a quick and easy way to cover door knobs.
  • Down the road, if you put a hole in the wall, you can go back to Step 2 through 4.
  • I DO NOT recommend this paint can spout. The one I like is no longer available. Looks similar to this, but with an aluminum lid that you hammer into the can. This is useful if you know you can't use the entire can of paint.
  • I've tagged and dated on my paint cans for reference.
  • Borrow as much as you can. If you're never going to paint again, borrow your rollers, ladder and extension poles.
  • If you own a house, it's not a bad idea to purchase your very own shop vac. It's a very useful thing. Spackle dust will ruin your regular vacuum filter.
Let's hear some of your home improvement stories. What advice would you give newbees? Have you painted? If you can't, how have you personalized your new hive?

Patty Melt

October 23, 2008



Ingredients:
  • Ground Beef/Burger Patties
  • 2 Onions
  • American cheese
  • Butter
  • Bread
  1. Cook the burger patties in a skillet.
  2. Caramelize the onions until they are golden brown.
  3. In the mean time, lightly butter your bread.
  4. Make a sandwich by placing your burger on the first slice of bread. Top with onions and cheese.
  5. Then place the other piece of bread on top and grill it on the skillet like a grilled cheese sandwich.
These are soooo yummy!

Update on To-Do List

October 21, 2008

FALL ‘08

Things to Do Soon

  • Put up Christmas lights around outside of house.
  • Clean gutters.
  • Install gutter guards.
  • Clean out attic
  • Clean out basement
  • Clean out LR closet
  • Change out light in my office.
  • Change light cover in upstairs hallway (out dated)-$30, get high efficiency bulb $15.
  • Repaint hallway and along stair to match living room (extra paint leftover)
  • Re-stain deck (before/after winter?)
  • Move patio furniture into basement for storage.
  • Buy new dryer (ours is on it’s way out)
  • Paint - columns, door step, shed, molding.

Living Room

  • Staple molding around room and get corner molding.
  • Sew drapes
  • Tape South window (it’s sagging and drafty).
  • Replace lights with hi-eff blubs.

Yard

  • Patio with pavers under BBQ grill- (Spring ’09)
  • Mulch around house throughout fall.
  • Plant bulbs (Tulips and Peonies).
  • Prune back lilac bushes
  • Place weeds on curb to be picked up.
  • Continue staining deck.
  • Repot plants and bring inside for winter.
  • Prune shrubs.
  • Spray paint wicker furniture.
  • Cut back plants that are done for the season.
  • Plant new shrubs/flowers.
  • Move Japanese maple tree.

WINTER ‘08
Kitchen

  • Staple molding around window.
  • Staple molding around doors.
  • Install exhaust hood and above stove cabinet.
  • Put in recessed lighting covers.
  • Install cabinets on refrigerator side.
  • Install dishwasher.
  • Install cabinets on sink side.
  • Cut existing counter top.
  • Do floor tiles. (Thanksgiving '08)
  • Give kitchen second coat of paint.

½ Bathroom

  • Spackle, sand and paint. (Working on spackle now.)
  • Staple molding
  • Fix window (it’s stuck) One day, I lifted it without any effort!!!
  • Toilet - Getting an estimate for installation soon.
  • Sink, Shower
  • Do floor tiles - $60
  • Paint and Install door (in attic)
  • Replace light and cover.

Painting

October 19, 2008

Today, I painted...
  • The columns on the front porch.
  • Spray painted the wicker chair.
  • The shed.
  • The foot of the door.


It seems of little importance, but these were loose ends that I kept putting off. Our door step got banged up so much during the move in that it was all scuffed up and chipped. Since I had exterior paint for the shed in the same color I used it for the door step considering it would be perfect for such a high traffic area with extreme temperature changes.

Door Casing

October 18, 2008

Today, Keith put the molding back around the doorways. When Keith removed the casing back in April, he did so very carefully and marked each one with masking tape and a sharpie. That way, when he went to put them on, he would know what goes where. They are made of solid wood, so we didn't want to waste them and replace them.



Before:


After: What a difference!


He was even able to salvage the original nails and reused them.


Now, all it needs is some spackle, paint and caulking to make it look like new!

While he worked on this, I did a few other things myself...

Window Trim

October 16, 2008

There's nothing new to report. I painted the trim on the inside of the window in preparation to staple the casing molding around the window this weekend.



Before:


I checked out Home Depot and they have the casing for $1.39/linear feet. For the window, we need about 20 feet. It's about 3.5'x5.5'.

Backsplash Ideas

October 13, 2008

I love tile. I guess it's part of my DNA. I have always loved materials of all types and of all the things you can make with them. I've been putting a lot of thought into tiling behind the stove. I'd like to do something a little more artistic than the traditional tile patterns. Possibly something more mosaic like. In particular I love glass tile. Glass tile also takes 1/2 the amount of energy needed to make ceramic tiles which is better for the environment. It's even better if you use recycled glass tile.

To tile behind the stove is a little tricky because we're afraid it will look funny since our stove is stand-alone. I found one picture here with our stove layout which I found interesting - exposed duct and all!


In addition, I found a really good tutorial on how to tile a back splash and add a shelf which is something I'd really like since we lack storage space as is.


Here's an example of a clear glass tile back splash from HomeStar. I love how clean it looks with a tint of blue.


Here's an interesting video on tiling a back splash with glass tiles.

I'm also a huge fan of mosaics and I find that people don't it anymore. Here's a blog and list of mosaic artists. Mosaics are so beautiful.

Our neighbor told us about Mercer Castle where there is lots of tile eye candy to see, so we might take a trip out there just for fun and get inspired!

Deck Complete!

October 12, 2008

I woke up early this morning and finished up the deck. It looks amazing.



I'm so glad it's done and over with!

Range Hood & Cabinet

October 11, 2008

Today, we finally got what I wanted for the range hood done! I'm so excited! My husband did a fantastic job. While he worked on this, I was gardening and staining the deck. Occasionally, I would stop in, snap a photo and see if he needed an assistance.
Time: 9 hours (with lots of breaks!)



I started by sketching a drawing of what I wanted it to look like. I'm not a very verbal person, so I prefer sketching what I envision. What you may want can be interpreted differently.


We picked up the 30x18 cabinet last night.


Keith measured 18" up from the bottom and began chiseling away at the soffit. The duct got punctured during the sawing process, but that is easily patched up with duct tape.


Size Does Matter...Looks as though he's going to get an elephant out of ceiling.


After a great deal of measuring, he made his own compass to draw a circle where the duct would pass through. The opening at the top of the cabinet was NOT in line with the opening at the bottom opening, so thorough measurements were necessary to ensure all would go well.


Drill a very large hole in the center.


Using a jig saw, start from the center and begin sawing in a swirl until you get to the edge of the circle and then cut the hole out.


The hole.


Using a stud finder, locate and mark your studs on the wall. You must screw the screws from the cabinet to a stud in order to hold it up securely. Otherwise, the cabinet and screw will rip out of the dry wall as soon as you put enough weight in the cabinets. Then transpose that measurement to the back of the cabinets. Ours were "off center". Mark.


Predrill holes at a diameter smaller than the diameter of the screws. By doing this, you don't lose sight of where the studs are on the walls. It also helps get things started, so you can quickly put the screws in while holding up a heavy cabinet (on your wife's head).


We needed a 3rd person to hold it up while Keith screwed the cabinet into the wall. I gave up my Tiny Tim post and made sure the cabinet was level ("straight"). Use a level.


Turns out the wires were located incorrectly to go into the opening that is in the back of the range, so we had to cut a little path to locate it correctly. Looks like Tetris is missing a piece. Fortunately, there wasn't a stud there to block us from doing this.


The range hood then screws into the bottom the cabinet from the inside of the hood. With a sharpie marker, we marked where the holes would have to go from the range to the cabinet. Take the hood back down. Predrill the holes into the cabinet where the marks were made. Then, I held it up again while Keith screwed the screws into the range to the cabinet.


Before doing anything involving wiring and electric, turn the power off in your house. Then, we reconnected the wiring. Afterwards, I spent the next hour cleaning and de-greasing the range.


We were also puppy sitting for our neighbor which was a real treat. It seems like every time we work on the kitchen, we're also dog sitting. His name is Carmel (as in Caramel) and he's such a good dog. It almost makes me want one. Almost...


Then we vacuumed and cleaned up. Since I knew the kitchen would be out of commission today, I cooked pot roast in the crock pot on the porch. It was so delicious and really hit the spot after a long day of work.


Tomorrow I will spackle the areas of the soffit that got chipped off and give the kitchen walls a second coat of paint which I have been meaning to do for a while now.

Still Staining



I hope to have this done by tomorrow.

Staining the Deck...still

October 9, 2008

Yup, I'm still at it...



Plank by plank...


It's been very buggy outside and I've been bitten up all over again. The best time to do this is during the early morning. I hope to have this finished by the weekend.

Bird Themed Fabric

The project that I look to the most after the kitchen is finished is to sew some curtains and fabric covered canvas' to hang on the wall. Here are some that I like, but I'm going to hold off on until the kitchen is complete. I haven't decided what the accent color will be yet. I was just going to let the materials of the cabinets, tiles and appliances kinda speak to me.

The Drawing Room by Anne Marie Horner



Starling in Pink by Alexander Henry



In particular, I really like these "fat quarter" bundles sold on Etsy. These are from FabricWorm on Etsy. August Fields by Amy Butler.



There's a new store called Spool in Center City Philadelphia that sells all these cool fabrics. I'm going to head down there one weekend and shop around for something that suits.

Birds and Trees

Help me choose one. I have been thinking about painting something in our kitchen when it's complete. I'd like to do a branch and a bird of some type. I found these decals on etsy.

What do you think? Something cutesy like the first one or something more realistic like the second one.

#1-
By SingleStoneStudios on Etsy


#2-
By BadAssDecals on Etsy

Let There Be Light!

One more thing we can cross off the To-Do list! We popped in the trim to the lights today. It was really easy once we found the trim. We had to go to a few stores before we could find what we wanted. Here they are!

Cost: $50



Before:



This weekend, I'm looking forward to tying up some other loose ends around the kitchen.

Fried Rice

October 8, 2008

Fried rice is a meal made with leftovers from the week. Often times, my family had rice leftover from dinner each night. On Friday night, my mom would chop up all the leftover meats and veggies and combine them with the leftover rice to make delicious fried rice! It's so yummy because it has all the seasonings already from the leftovers.



Ingredients:
  1. Leftover rice - If you make fresh rice, let it sit uncovered over night in the fridge.
  2. Vegetable or olive oil
  3. 2 Eggs
  4. Diced onions and garlic
  5. Diced meat and veggies
  6. A drizzle of soy sauce - I recommend Kikkoman for fried rice.
Heat up the wok until it's hot. Add a drizzle of oil. When the oil is hot, add the diced onions, garlic and rice. Give it a good stir until it's brown and toasty. Then add the diced meat/veggies. Drizzle some soy sauce. It's not necessary, but some people like it. Stir it all around.

*If you're using raw meat and veggies, cook that with the onions and garlic first. Cook the meat until it's fully cooked. Then add the rice and soy sauce.*



The last thing you do is add 2 eggs. I crack the eggs into the center of the wok and scramble them up. Then I stir everything together and it's ready to eat! Re-season if necessary with salt and pepper.



(I used leftover baked chicken and broccoli tips).

Enjoy! Let me know if you try this!

Outlets

October 5, 2008

We've been really busy, so we've been doing what we can with the kitchen. Today, we replaced all the outlets and the plate covers. We did it simply for cosmetic reasons, so that it looks updated and will match the rest of the soon to be updated kitchen.

We replaced 12 outlets and it cost $40.

Before:


After:


Pretty!

LinkedIn

Related Posts with Thumbnails